4 Handling the printer
Setup items
Thickness
4.4.13 Heater menu
Set the temperature of the Heater.
Use the [F2] or [F4] key to select the requested temperature for the Heater .
4.4.14 Drier menu
Set the temperature of the Drier.
Use the [F2] or [F4] key to select the requested temperature for the Drier.
Parameters
50µm-<100µm>-1500µm
Heater
OFF - 50°C
OFF - 50°C
OFF - 50°C
F2, F4
F2, F4
-->
-->
Drier
OFF - 50°C
OFF - 50°C
F2, F4
-->
4-17
Rockhopper II - User's Guide
Description
Change media thickness by operating the following keys.
• [F2]key: Increase setup value.
• [F4]key: Decrease setup value.
• [ENTER]key: Confirm setup value, shift to the previous
hierarchy menu.
• [CANCEL] key: Cancel setup value, shift to the previous
hierarchy menu.
4.4.7 User media menu
+
+
50°C
50°C
-
-
ENTER
ENTER
+
50°C
-
ENTER
4
4
4
4
4