Set Mode; General - Icom ic-718 Instruction Manual

 General
The Set mode is used for programming infrequently
changed values or conditions of functions. The IC-718
has 2 separate set modes: Quick Set mode and Initial

Set mode.

D Quick Set mode operation
q While power is ON, hold down [SET] for 1 second.
• The Quick Set mode is selected and one of its items ap-
pears.
w Push [UP Y] or [Z DN] to select the desired item.
e Rotate the main dial to set the values or options for
the selected item.
r Repeat w and e to set other items.
t To exit the Quick Set mode, momentarily push
[SET].
D Initial Set mode operation
q Hold down [POWER] for 1 second to turn power
OFF.
w While holding down [SET], push [POWER] to turn
the power ON.
• The Initial Set mode is selected and one of its items ap-
pears.
e Push [UP Y] or [Z DN] to select the desired item.
r Rotate the main dial to set the values or options for
the selected item.
t Repeat e and r to set other items.
y To exit the Initial Set mode, hold down [PWR] for 1
second to turn the power OFF.
u Push [PWR] to turn power ON again.
• The settings you made in the Initial Set mode are now
effective.
SET MODE
[DISPLAY EXAMPLE: QUICK SET MODE]
[PWR]
[DISPLAY EXAMPLE: INITIAL SET MODE]
8
[DIAL]
[SET]
[Z DN] [UP Y]
Item
Value
[DIAL]
[SET]
[Z DN] [UP Y]
Item
Value
41