Icom ic-718 Instruction Manual page 50

8
SET MODE
• Tuner type
This item selects optional antenna tuner type. Select from
the following options.
• no: No optional tuner connected.
• 4: The optional AH-4 antenna tuner.
( Select this type also when using the optional AH-740.)
• 18: The optional AT-180 antenna tuner.
The default is "no."
• Auto tune
The optional AT-180
capability which starts tuning if the SWR is higher than 1.5–
3.
When "OFF" is selected, the tuner remains off, even when
the SWR is poor (1.5–3). When "ON" is selected, the auto-
matic tune starts even when the tuner is turned OFF.
The default is "oF" (OFF).
• PTT tune
The optional AH-4, AH-740 or AT-180
can automatically start tuning the moment the PTT
TUNER
is pushed.
The default is "oF" (OFF).
• Speech language*
The optional UT-102
select between English and Japanese as the speech lan-
guage.
The default is "En" (English).
• Speech speed*
The optional UT-102
select faster or slower synthesizer output.
The default is "HI" (High).
• Speech S-meter level*
The optional UT-102 allows you to set the synthesizer
to read the frequency/mode only (OFF), or both the fre-
quency/mode and S-meter level (ON).
The default is "on" (ON).
• CI-V baud rate
This item sets the data transfer rate. When "Auto" is se-
lected, the baud rate is automatically set according to the
connected controller or remote controller.
The default is "At" (Auto).
* The UT-102
VOICE SYNTHESIZER
46
has an automatic start
ANTENNA TUNER
AUTOMATIC ANTENNA
allows you to
VOICE SYNTHESIZER UNIT
allows you to
VOICE SYNTHESIZER UNIT
is no longer produced and these setting items do not function.