Icom ic-718 Instruction Manual page 51

8
SET MODE
• CI-V address
To distinguish it from other equipment, each CI-V capable
transceiver has its own Icom standard address in hexadec-
imal code. The IC-718's address is 5E.
When 2 or more IC-718s are connected to an optional CT-17
CI-V , rotate the main dial to select a differ-
LEVEL CONVERTER
ent address between 01H to 7FH, for each IC-718.
The default is 5E.
• CI-V Transceive
Transceive operation is possible with the IC-718 connected
to other Icom HF transceivers or receivers. When "on" is
selected, changing the frequency, operating mode and
so on, on the IC-718 automatically changes those of con-
nected transceivers (or receivers) and vice versa.
The default is "on" (ON).
• CI-V 731 mode
When connecting the IC-718 to the IC-735 for transceive
operation, you must change the operating frequency data
to 4 bytes.
• This item MUST be set to "on" when operating the IC-718 with
the IC-735.
The default is "oF" (OFF).
• Optional fi lter
When an optional IF fi ler is installed, you must fi rst set the
item to "on" to be able to select the fi lter. Selectable fi lters
† † †
are FL-96 , FL-222, FL-52A , FL-53A , FL-257 and none
(default). See page 24 for usable fi lters for each mode and
see page 50 for fi lter installation.
• Expanded fi lter selection
When an optional IF fi lter is installed, this selection ex-
pands fi lter and fi lter selection (W/N) key combination on
operating mode independen†
• Filter selection (Wide/Narrow)
When an optional IF fi lter is installed, you can arrange the
fi lter and fi lter selection key combination. (p. 25)
†
This fi lter is no longer produced.
47