Dial Lock Function; Frequency Settings - Icom ic-718 Instruction Manual

D 1 Hz and 10 Hz tuning steps
When the programmable tuning step, "," disap-
pears, rotating [MAIN DIAL] changes the frequency in
increments of 1 or 10 Hz.
q Push [TS] one or more times until "" disappears.
w Hold down [TS] for 1 second to toggle between the
1 Hz and 10 Hz step settings.
• When the 1 Hz step is selected, the 1 Hz digit appears
in the frequency readout.
• When the 10 Hz step is selected, the 1 Hz digit disap-
pears from the frequency readout.
[TS] SWITCH FLOW CHART
10 Hz tuning
Hold down
for 1 second
1 Hz tuning
 Dial Lock function
The Dial Lock function electronically locks [MAIN
DIAL].
➥ Push [LOCK] to turn the function ON or OFF.
• "LOCK" appears when the function is ON.
Hold down
for 1 second.
Hold down
Push
for 1 second

FREQUENCY SETTINGS

Rotating [MAIN DIAL]
changes the frequency
in 10 Hz steps.
TS
Rotating [MAIN DIAL]
changes the frequency
in 1 Hz steps.
Programmable step tuning
(100 Hz –100 kHz)
Hold down
for 1 second
Push
Selectable for each mode.
Appears
4
19