Quick Set Mode Items - Icom ic-718 Instruction Manual

8
SET MODE
 Quick Set mode items
• RF power
This item adjusts the RF output power. The RF output
power can be adjusted from L, 1 to 99 and H.
•The default is H (maximum power).
Note that while adjusting the output power, the power meter
is automatically displayed.
• Mic gain
This item adjusts microphone gain from 0 to 99 and H.
The default is 50.
• VOX gain
This item adjusts the VOX gain for the VOX (voice acti-
vated transmit) function.
The default is 50.
• VOX delay
This item adjusts the VOX (voice activated transmit) delay
time from 0 to 2 seconds in 0.1 second units.
The default is 10 (1.0 second).
• Anti VOX level
This item adjusts the ANTI-VOX gain for the VOX (voice
activated transmit) operation.
The default is 50.
• CW pitch
This item adjusts CW tone pitch from 300 Hz to 900 Hz in
10 Hz steps.
The default is 60 for 600 Hz.
• BK-IN
This item selects break-in type for CW operation from the
following values:
oF: No break-in is enabled (default).
SE: Semi break-in is enabled.
FL: Full break-in is enabled
42
.