COLLECT THE CONFIGURATION INFORMATION
This section describes how to collect the information on the hardware configuration and the inside specifications.
In order to collect information, use the "Diagnostic Program".
IMPORTANT:
below after restarting the system.
1.
Point to [Settings] in Start menu, and click [Control Panel].
The [Control Panel] dialog box appears.
2.
Double-click [Management Tool], and double-click [Computer Management].
The [Computer Management] dialog box appears.
Click [System Tool] → [System Information].
3.
4.
Click [Save as System Information File] in the [Operation] menu.
5.
Input the file name to save in the [File Name] box.
6.
Click [Save].
If a STOP error, system error, or stall occurred, follow the procedure
8-56