Removing And Installing Centre Console Switch Module - Volkswagen up! 2012 Workshop Manual

up! 2012 ➤
Electrical system - Edition 03.2017
– Release the two catches -arrows-, and push driver side interior
locking button for central locking system - E308- -1- out of op‐
erating unit for window regulator in driver door - E512- .
Installing
Installation is carried out in the reverse sequence of removal.
2.13 Removing and installing centre console
switch module
The centre console switch module - EX23- is located in the centre
console in front of the gear lever and, depending on the equip‐
ment in the vehicle, contains the following components:
♦ Tyre pressure monitor display button - E492-
♦ Pushbutton for emergency braking function - E773-
♦ Socket - U- or cigarette lighter - U1-
Removing
– Switch off ignition and all electrical consumers, and withdraw
ignition key.
– Remove cover of centre console ⇒ General body repairs, in‐
terior; Rep. gr. 68 ; Centre console; Assembly overview -
centre console .
– Release the two catches -arrows- and pull the mounting frame
-1- outwards out of centre console -2-.
– Release the catches -arrows- with a suitable screwdriver and
push centre console switch module - EX23- -1- out of mounting
frame -2-.
Installing
Install in the reverse order of removal observing the following:
138
Rep. gr.96 - Lights, bulbs, switches - interior