Yamaha XT 600 AC Service Manual page 93

TIRE INSPECTION
~
------------------------------------------------------
I
A INDSJPI~I
@
341 -004
3-43
2. Adjust:
- Air pressure
***********************
Adjustment steps:
.Remove the valve cap .
Use an air pump or Increase the air
pressurized air pressure.
supply.
Release the air by Decrease the air
pushing the valve.
pressure .
• Install the valve cap securely.
***********************
3. Inspect:
-Tire surfaces
Wear / Damage -> Replace .
Minimum tire tread depth:
(front and rear)
0.8 mm (0.03 in)
CD
Tread depth
@
Side wall
®
Wear indicator
AWARNING
-It
is dangerous to ride with a worn out tire.
When a tire tread begins to show lines,
replace the tire immediately.
- Patching a punctured tube is not recom-
mended. If it is absolutely necessary to do
so, use great care and replace the tube as
soon as possible with a good quality
replacement.
4. Tighten:
-Valve stem locknut
1"i5J
1.5 Nm 10.15 m·kg. 1.1 ft-lb)
AWARNING
Ride conservatively after installing a tire to
allow it to seat itself properly on the rim.