The 2U Library Monitor Library: Drive; Cartridge - IBM TS3100 Setup, Operator, And Service Manual

Figure 5-28. The 2U library Monitor Library: Drive Identity page showing one Ultrium 3 HH SAS drive (#1) and one
Ultrium 4 HH SAS drive (#2). Version 2 information displayed for drive #1 identifies the drive as a V2 drive (Feature
Code 8049 - Ultrium 3 HH SAS Drive V2).
Monitor Library: Library Status
This page displays the dynamic information about the library, such as the current
status of the components. No changes can be made from this page. Table 5-8 lists
all available elements on the Library Identity page. An "X" indicates that the
element displays for the specified library type.
Table 5-8. Library Status page elements
Menu Item Description
Status Library status is displayed using icons with text. A checkmark with the
word "Ready" indicates the library is functioning properly. An
exclamation point with the word "Caution" indicates the library can
function, but is experiencing a problems. An X with the word "Error"
indicates the library is not functioning because of a serious problem.
Cartridge in This identifies a cartridge that is currently being moved by the accessor.
Transport "None" is displayed if no cartridge is being moved.
Number of Moves This is the number of times the accessor has moved a cartridge from
Point A to Point B (for example, from a storage slot to a drive).
Total Power On This is the total amount of time that the library has been powered ON.
Time
Accessor Status This is the current status of the accessor.
Left Magazine This displays whether the left magazine is "Present" or "Not Present".
Right Magazine This displays whether the right magazine is "Present" or "Not Present".
1. Left Magazine This displays whether the lower left magazine is "Present" or "Not
Present".
2U 4U
X X
X X
X X
X X
X X
X
X
X
5-37
Chapter 5. Operations