Verifying The Shipment; Installing The Library Foot Pads (For Desktop Installation Only) - IBM TS3100 Setup, Operator, And Service Manual

Important: Do not place the library on the front panel or the rear panel as this

Verifying the Shipment

Verify that the following items are included in your library shipment:
v With every library:
– Power cord
– Foot pads (for desktop installation)
– Documentation CD:
- Setup, Operator, and Service Guide
- Translated Safety Notices
- Statement of Limited Warranty (in 29 languages)
– IBM License Agreement for Machine Code
– Installation Quick Reference
– Warranty information (in 9 languages)
– Quality Hotline card
v With every library containing a SCSI drive:
– SCSI terminator (one per SCSI drive)
– SCSI library-to-host cable (if ordered by customer)
– SCSI Wrap tool (one for each library)
v With every library containing a Fibre Channel drive:
– Fibre wrap tool (one per library)
– Fibre Channel library-to-host/switch cable (if ordered by customer)
v With every library containing a SAS drive:
– SAS library-to-host cable (if ordered by customer)
– SAS Wrap tool (one for each library)
v Optional item that is included in your shipment, if ordered:
– Rack Mount Kit
Important: If any of the contents of your shipment are damaged or missing, please
call the appropriate number listed on the Quality Hotline card.
Installing the Library Foot Pads (for Desktop Installation
ONLY)
If you intend to install your library in a rack, skip this step and proceed to
"Removing and Storing the Shipping Lock" on page 4-4.
Important: Operating your library on a flat surface without foot pads may damage
your library or cause it not to function properly.
Six foot pads must be installed on the bottom of the library before the library can
be used as a desktop unit.
To install the library foot pads:
1. Being very careful, lay the library on its side.
2. Peel the adhesive from the back of each foot pad.
may damage the library.
Chapter 4. Installation and Configuration
4-3