Chapter 2. Configuration And Administration Tools; Using A Keyboard, Monitor, And Mouse For Setup And Configuration; Summary Of Configuration And Administration Tools - IBM totalstorage 326 User Reference

Chapter 2. Configuration and administration tools

The Model 326 appliance comes with the following configuration programs that you
can use to configure and administer the appliance:
v Terminal Services Client
v IBM Advanced Appliance Configuration Utility (IAACU)
v Universal Manageability Services
v Windows 2000 for Network Attached Storage
This chapter describes these tools in general and then in detail.

Using a keyboard, monitor, and mouse for setup and configuration

It is highly recommended that you directly attach a keyboard, monitor, and mouse to
the Model 326 when performing these tasks:
v Initially setting up and configuring the device
v Changing or adding to RAID arrays (for example, adding a new array with
v Troubleshooting the device

Summary of configuration and administration tools

There are several ways to set up and administer the Model 326. Table 2 on page 10
suggests which tool to use for specific functions, but does not list all options or
combinations. The administrator's training level or preferences might determine an
alternate approach from that suggested in the table.
© Copyright IBM Corp. 2002
Attention
Changing the preloaded software configuration of this product, including
applying or installing unauthorized service packs or updates to preinstalled
software, or installing additional software products that are not included in
either the preloaded image or on the Supplementary CD, might not be
supported and could cause unpredictable results. For updated compatibility
information, refer to the IBM web site:
http://www.storage.ibm.com/nas
To correct problems with a preloaded software component, back up your user
and system data. Then, use the Recovery CD to restore the preloaded
software image.
Storage Manager, adding a new RAID controller, or adding a storage expansion
unit)
9