Completing The Installation Of The Replacement Library Enclosure; Mounting Brackets And Anchors For; Front View Of A Rack Showing The Rails - IBM TS3100 Setup, Operator, And Service Manual

Figure 10-27. Mounting brackets and anchors for securing the library in a rack (one bracket and anchor on each side
of the library)
2. With assistance, slide the replacement library enclosure onto the metal rails that
Figure 10-28. Front view of a rack showing the rails installed
3. Tighten the mounting bracket screws ( 1 in Figure 10-15 on page 10-16) to
4. Proceed to "Completing the Installation of the Replacement Library Enclosure."
Desktop Installation:
1. Place the library in its permanent location.
2. Proceed to "Completing the Installation of the Replacement Library Enclosure."
Completing the Installation of the Replacement Library
Enclosure
1. Connect all cables to the replacement library enclosure.
2. Power ON the replacement library enclosure.
3. Upgrade library firmware and drive firmware to the latest version.
10-28
TS3100 Tape Library and TS3200 Tape Library Setup, Operator, and Service Guide
1
are already in position in the rack (see Figure 10-28).
anchor the replacement library enclosure to the rack.
2