IBM TS3100 Setup, Operator, And Service Manual page 232

Table 8-1. Main Error Codes (continued)
Error Code Description
F1 Drive Communication Error
Library controller has lost communication to drive
The subcode indicates which drive is affected.
Example:
Subcode 02: drive #2
F2 Drive Sled not present
The subcode indicates which drive sled is affected.
Example:
Subcode 02: drive sled #2
F3 Drive Hardware Error
The subcode indicates which drive is affected.
Example:
F3 xy
Where x refers to the hardware drive error code (single
character display) and Y refers to the drive position in the
library. x values:
v 4: firmware or hardware error
v 5: hardware error
v 6: hardware or media error
v A: recoverable hardware error
F4 Drive Load Timeout
Drive has run in a timeout while loading a tape.
The subcode indicates which drive is affected.
Example:
Subcode 02: drive #2
F5 Drive Unload Timeout
Drive has run in a timeout while unloading a tape
The subcode indicates which drive is affected.
Example:
subcode 02: drive #2
8-6
TS3100 Tape Library and TS3200 Tape Library Setup, Operator, and Service Guide
User Action
Refer to "Isolating Drive Sled
Problems" on page 7-10.