Sliding The 4U Library Into The Rack; Securing The 2U Library To The Rack - IBM TS3100 Setup, Operator, And Service Manual

Figure 4-14. Sliding the 4U library into the rack
8. Using a #2 Phillips screwdriver, secure the library to the rack (see Figure 4-15
Figure 4-15. Securing the 2U library to the rack
or Figure 4-16 on page 4-14) by placing a screw in the center hole of each
mounting bracket and tightening them ( 1 ).
1
Chapter 4. Installation and Configuration
4-13