Operator Control Panel Navigation - IBM TS3100 Setup, Operator, And Service Manual

Table 5-1. Menu navigation shortcuts (continued)
Information/
Activity Operator Control Panel
Slots, number Monitor > Library > Status
empty
Slots, reassign Note: Varies according to the
number of active, number logical libraries.
reserving
Single partition: Configure >
Logical Library Settings
Multiple partitions: Configure
> Logical Library Settings >
Logical Library (n)
SNMP, modify Not available with this
settings interface.
Telnet Service Service > Telnet Service Port
Port, activate
Time elapsed Monitor > Library > Status
since power ON
Operator Control Configure > Set Access PIN
Panel, access
PIN,
enable/disable
Web User Not available with this
Interface, user interface.
access, create or
modify

Operator Control Panel Navigation

The four control keys on the front of a 2U or 4U library enable the user to navigate
through the library settings and make changes as needed to configure the library.
Menu Navigation Shortcuts
For More Info Web User Interface
"Monitor: System Status screen
Library" on
page 5-10
"Configure: Configure Library >
Library" on General
page 5-20
Configure Library >
SNMP
"Service: Not available with this
Telnet Service interface.
Port" on page
5-32
"Monitor: Monitor Library > Library
Library" on
Status
page 5-10
"Configure: Not available with this
Set Access interface.
PIN" on page
5-25
Configure Library > User
Access
For More Info
"Configure
Library: General"
on page 5-44
"Configure
Library: SNMP"
on page 5-67
"Monitor Library:
Library Status" on
page 5-37
"Configure
Library: User
Access" on page
5-64
5-7
Chapter 5. Operations