Headlight Bulb Replacement; Side Stand Switch - KYMCO PEOPLE 250 Service Manual

19
. SWITCHES/HORN/FUEL UNIT/THERMOSTATIC SWITCH
/TEMPERATURE GAUGE/INSTRUMENTS/LIGHTS
FRONT POSITION LIGHT
/HEADLIGHT BULB
REPLACEMENT
Remove the handlebar front cover. ( 2-3)
Remove the bulb socket by turning them
counterclockwise.
Remove the bulb and replace with new one.
Disconnect the headlight wire couplers.
Remove the rubber boot from the bulb socket.
Relax the lock clip to remove the bulb and
replace with new one.
Install the bulb, aligning the bulb socket tab
with the groove and set the lock clip.
Install the rubber boot.
Install the handlebar front cover in the reverse
order of removal.
TAILLIGHT LIGHT BULB EPLACEMENT
Remove the two screws attaching the rear
light shell and remove the light shell.
Remove the bulb and replace with new ones.
The installation sequence is the reverse of
removal.

SIDE STAND SWITCH

Color
Yellow/
Position
Green
DOWN
UP
Green Yellow/
Black
Front Position Light Bulb Socket
Bulb Socket
Front Position Light Bulb
Sockets
Screws
Side Stand Switch
PEOPL E 250
Rubber Boot
Bulb
Side Stand Switch
19-8