Bulb Replacement - KYMCO ZX/SCOUT 50 Service Manual

16
. INSTRUMENT/SWITCHES/LIGHTS
HORN INSPECTION
Remove the frame front cover. ( 12-3)
Disconnect the horn wire couplers.
horn is normal if it sounds when a 12V
battery is connected across the horn wire
terminals.
FRONT TURN SIGNAL LIGHT
REPLACEMENT
Remove the turn signal light shell and the
bulb.
Replace with new ones.
TAILLIGHT/STOPLIGHT/REAR TURN
SIGNAL LIGHT BULB REPLACEMENT
Taillight Shell Removal:
Remove two screws attaching the taillight
shell.
Remove the taillight shell and stop light
bulb.
Remove the rear turn signal light bulbs.
The installation sequence is the reverse of
removal.
16-7
Horn
The
ZX / SCOUT
Battery
Turn Signal Light Bulb
Taillight Shell
Screws