Using The Wireless Manager To Turn On The Phone; Activating The Phone - Intermec CN3 User Manual

Chapter 5 — Network Support

Using the Wireless Manager to Turn on the Phone

Activating the Phone

130
Note: The Wireless Manager application is available only when Microsoft
Zero Configuration is enabled. If Intermec Security is enabled, then this
application is not available. See
configuring Microsoft Security.
You can use the Wireless Manager to enable and disable Bluetooth, Wi-Fi,
and the Phone if it is built into your CN3.
To turn on the phone using the Wireless Manager
1 Tap Start > Settings > the Connections tab > the Wireless Manager
icon, or tap the Wireless Manager row from the Today desktop.
2 In the Wireless Manager, either tap All or tap Phone, then wait for "On"
to appear beneath the Phone row.
3 Once activated, the name of your phone network appears in the Today
screen like the following:
4 Tap Menu > Phone Settings to configure the phone (more information
to follow).
5 Tap Done to close the Wireless Manager.
The CDMA phone is activated using the Activation Wizard in the Phone
application. Contact your Intermec representative for more information.
With the WAN radio module installed in your CN3, you can send and
receive telephone calls. Use the speaker on the back of the computer as your
page 178 for information on enabling and
CN3 Mobile Computer User's Manual