Logging Supplicants - Intermec CN3 User Manual

Chapter 5 — Network Support
158
4 Depending on how the screen is set up, you can toggle between a graph
and a list of ping results:
• Tap Graph to toggle to the graphical view of 25 of the most recent
pings and their response results, like in the following sample graph:
Maximum ping
Minimum ping
Note the size of the gray area represents the standard deviation from the mean.
• Tap List to toggle to detailed information showing what ping touched
what host and its RTT (Round Trip Time).

Logging Supplicants

If you reach a situation where you need to send in debug information to
Intermec Product Support or Intermec Engineering, you can use the
Intermec Funk Security logging feature.
To enable the logging feature
1 Tap the Supplicant tab, then tap Configure Profile to access the Profile
Wizard.
2 Tap Edit Selected Profile, then tap the Advanced tab.
3 Check Enable Logging, tap ok to close the profile settings, then tap ok
to close the Profile Wizard.
Last ping
Average ping
CN3 Mobile Computer User's Manual