Using Installselect; Using The Installselect Application - Intermec CN3 User Manual

Chapter 3 — Configuring the Computer

Using InstallSelect

84
Note: This application should only be used by administrators, developers,
integrators, or Intermec representatives.
InstallSelect manages the installation of value-added software features of the
CN3. Removal of software features may result in loss of device
functionality, or the ability to manage device settings. See
Software Feature Descriptions" on page 85
representative for information about each software feature before making
changes.
You can use the InstallSelect application to reduce the amount of virtual
memory used by portions of the SmartSystems Platform Bundle (SSPB).
See "SmartSystems Platform Bundles" on page 21
about SSPB.
Freeing up virtual memory provides you with more space to load and run
custom applications. In technical terms, virtual memory allows software to
run in a memory address space whose size and addressing are not necessarily
tied to the physical memory of the CN3.
InstallSelect is not intended to be run with any other application.
After the clean boot is performed, the applications cleared (unchecked)
from the list shown in InstallSelect are not installed. You can reinstall any of
these SSPB components using InstallSelect. Be sure to back up any related
files that you wish to retain before you proceed. See
on page 29 for more information about performing the clean boot.

Using the InstallSelect Application

The InstallSelect application is included in the SSPB, which is installed at
the factory.
To use the InstallSelect application
1 Select Start > Programs > the File Explorer icon.
2 Browse to the "\Windows" folder, then scroll down to and select the
InstallSelect application.
"Understanding
or contact your Intermec
for more information
"Clean Boot Process"
CN3 Mobile Computer User's Manual