Intermec CN3 User Manual page 179

CN3 Mobile Computer User's Manual
Use the Profiles page to select and configure between the networking
environments assigned to this 802.11b/g radio.
• Tap the Profile drop-down list to choose between four different profiles
assigned to this CN3, then tap Edit Select Profile, make the changes
needed for this profile (starting on the next page), then tap ok to return
to the Profiles page.
• Check Enable Microsoft's Wireless Zero Config to enable Microsoft's
Wireless Zero Config application and disable the Intermec software
solution for 802.11b/g, including configuration via the Wireless
Network applet.
Basic
Use the Basic page to set the network type, name, and manage battery
power for this profile. Tap ok to return to the Profiles page.
• Enter a unique Profile Label name for your profile.
• Tap the Network type list to select "Infrastructure" if the network uses
access points to connect to the corporate network or internet; or
"Ad-Hoc" to set up a private network with one or more participants.
• If you select "Ad-Hoc" for the network type, select the Channel on
which you are communicating with others in your network. There are up
to 11 channels available.
Chapter 5 — Network Support
165