Intermec CN3 User Manual page 135

CN3 Mobile Computer User's Manual
To perform a manual setup
Note: If you know the Bluetooth Device Address of the printer you want to
use, use this procedure to avoid a Device Search.
1 Select Start > Settings > the System tab > the Wireless Printing icon.
2 Tap Manual, enter the address of your device in the field, then tap OK.
Tap Cancel to return to the first screen without making changes.
When you set your printer manually, your device may not receive the
printer name. Therefore, "-unknown-" can display under Device Name.
To set a different printer
1 Select Start > Settings > the System tab > the Wireless Printing icon.
2 Tap Set Different Printer to return to the device search screen.
3 Tap either Search or Manual, tap OK, then do the applicable steps.
4 Tap Cancel to return to the current wireless printer settings without
making changes, then tap Exit to close the applet.
Chapter 5 — Network Support
121