Intermec CN3 User Manual page 149

CN3 Mobile Computer User's Manual
Updating Your PCS Vision Profile
Tap the Data Settings tab to either repair your connection settings or
automatically update your PCS Vision.
• When the built-in phone data connection used by Microsoft's
connection manager is corrupted, tap Repair Connectoid to repopulate
the registry with the correct values for the data connection.
If you find you cannot make a data connection to the CDMA data
network, tap Repair Connectoid to assure that the connection entry
used by the CDMA device is correct.
• For Sprint networks, if your CN3 is unable to make a data connection
and it has been more than four hours since activation, tap Provision,
then follow the prompts to launch data provisioning from this screen. It
takes a few minutes to set up the data portion of the WWAN network.
Note: The data provisioning process can be automatically initiated by the
Sprint network, by attempting to make a cellular line connection to the
WAN before the CN3 is data provisioned, or by manually starting the
connections through this screen. Intermec recommends that Sprint
Network "push" the data provisioning to your CN3. This should occur
shortly after the voice activation is complete.
To repair your connections
1 Click Repair Connected, then tap Yes to perform the repair.
2 Tap ok to return to the Data Settings tab.
Chapter 5 — Network Support
135