Audio Device Icons - Intermec CN3 User Manual

CN3 Mobile Computer User's Manual
3 Select the services tied to the Bluetooth audio device to which you are
connecting, then tap Finish.
Once the pairing is successfully completed, the Bluetooth audio device
appears in the list of devices that are found. You can double-tap any of the
devices for a pop-up menu to set it as a default, make a connection, refresh
the connection, or delete the device from the list.
Note: You can only select one Bluetooth audio device as the default device.
You must set a device to default before you can connect to that device.

Audio Device Icons

Each device has two icons to the left, one to reflect its connection status,
the other to reflect its default status. This table lists their meanings:
Bluetooth Audio Device Status Icons
Icon Description
Your CN3 and your Bluetooth audio device are not connected. Note the red
diagonal bar.
Your CN3 and your Bluetooth audio device are connected.
Your Bluetooth audio device is not set as the default.
Your Bluetooth audio device is set as the default. Note the red check mark.
Chapter 5 — Network Support
123