Intermec CN3 User Manual page 33

CN3 Mobile Computer User's Manual
Understanding the Power Profiler Settings
Power Profiler Setting
Windows Mobile Classic
Windows Mobile Standard (default) X
Windows Mobile Phone
Use the Windows Mobile Classic profile for systems that batch data and
upload it several times a day. This profile does not support constant data
connections over WAN, LAN, or Bluetooth in low power mode. It can only
maintain data connections when the CN3 is in the highest power state and
all peripherals are enabled.
Use the Windows Mobile Standard profile to save the most power. It is a
good choice for applications such as inventory management or terminal
emulation applications that power off infrequently. The Windows Mobile
Standard profile adds the ability for the system to maintain data
connections in a low power state.
Use the Windows Mobile Phone profile when you have a system that
requires network wakeup or you need the CN3 to always be connected to
the network. Although the connections are maintained at a low power state,
this setting typically consumes the most power.
To select a power management profile
1 Tap Start > Settings > the System tab > Power Profiler.
2 From the drop-down list, select Windows Mobile Class, Windows
Mobile Standard, or Windows Mobile Phone.
3 Tap ok in the upper right corner to save your changes and close Power
Profiler.
Power Profiler also provides advanced settings that allow you to fine-tune
the power usage of the CN3. You can also choose to have the Power button
turn off the screen or turn off the device.
Chapter 1 — Using the Computer
Screen Off Enabled Device Off Enabled
X
X
X
19