Intermec CN3 User Manual page 193

CN3 Mobile Computer User's Manual
To configure Microsoft Security using Intermec Settings
1 Tap (+) to expand Communications > 802.11 Radio > Microsoft
Security.
2 Select Network name (SSID) and enter the SSID.
To connect to an ad-hoc connection
• Set Infrastructure Mode to "Ad hoc".
To disable WEP encryption
• Set Network Authentication to "Open" if WEP keys are not
required; or "Shared" when WEP keys are required.
• Set Data Encryption to "Disabled".
To enable WEP encryption
• Set Network Authentication to either "Open" if WEP keys are not
required; or "Shared" when WEP keys are required for association.
• Set Data Encryption to "WEP."
• If you need to change the network key, set Network Key Setting to
"Enter Key and Index", enter the new key in Network Key Value, and
select the appropriate index under Network Key Index.
To enable WPA authentication
• Set Network Authentication to "WPA."
To enable WPA authentication using a preshared key
• Set Network Authentication to "WPA-PSK," then enter a new
network key under Pre-Shared Key.
3 Select File > Save Settings to set the changes made.
Chapter 5 — Network Support
179