Using The Gsm/Edge Radio Phone Application; Using The Wireless Manager To Turn On The Phone - Intermec CN3 User Manual

Using the GSM/EDGE Radio Phone Application

Using the Wireless Manager to Turn on the Phone

CN3 Mobile Computer User's Manual
Knowing the Version Numbers of Your Phone Features
Scroll to, then tap the Version Information tab to view the latest versions
of all of your phone features. Move the scroll bar along the bottom to the
right to see additional information.
With the WAN radio module installed in your CN3, you can send and
receive telephone calls as well as transmit data via wide-area cellular
networks. The CN3 provides a phone speaker, microphone, and
speakerphone, and supports the use of a Bluetooth headset or hands-free
kit. At factory-default, the phone is disabled. To turn on the phone, use
either of the following methods:
Note: The Wireless Manager application is available only when Microsoft
Zero Configuration is enabled. If Intermec Security is enabled, then this
application is not available. See
configuring Microsoft Security.
You can use the Wireless Manager to enable and disable Bluetooth, Wi-Fi,
and the Phone if it is built into your CN3.
Chapter 5 — Network Support
page 178 for information on enabling and
137