Connecting the CN50 Using USB Communications
Configuring the Phone
Turning On the Phone Using the Wireless Manager
CN50 Mobile Computer User's Manual
You can use the CN50 AC adapter to transmit data to and receive data
from a desktop PC or an Ethernet multidock through USB
communications. The USB port supports both USB client and USB
host. The port automatically senses the cable you are using and
determines which drivers to use. For more information about this
accessory and how to order it, see
The CN50 supports two types of mobile wireless phone technology:
•
CDMA
•
UMTS
With a radio module installed in the CN50, you can send and receive
telephone calls as well as transmit data through wide-area (WAN)
cellular networks.
The CN50 provides a phone speaker, microphone, and speakerphone.
It also supports the use of a Bluetooth headset or hands-free kit. The
factory default setting for the phone is disabled.
After you have turned on the phone and activated with the wireless
carrier of your choice, you can customize the features of the phone
and network settings. For help, refer to the online help on your CN50.
You can use the Wireless Manager to enable and disable Bluetooth,
Wi-Fi, and the phone on your CN50.
To turn on the phone using the wireless manager
1 Tap Start > Settings > the Connections tab > Wireless Manager.
Chapter 2 — Connecting and Configuring the CN50
"Accessories" on page
64.
33