Chapter 5 — Network Support
Connecting to Bluetooth Audio Devices
122
The Bluetooth audio user interface is a part of the Bluetooth Audio applet.
You can use this applet to search for, activate, and connect to Bluetooth
audio devices, such as Bluetooth headsets. You can control the audio
volume and the amplification for the microphone for the connected
Bluetooth audio device (if the connected device has these capabilities).
To access the Bluetooth Audio applet
1 From the CN3 desktop, select Start > Settings.
2 Tap the System tab, then tap the Bluetooth Audio icon.
Searching for Bluetooth Headsets
To search for a Bluetooth headset with either a "headset" or a "hands-free"
profile, tap Search for devices. Audio devices that are found are added to
the list with an icon to identify either profile.
1 When searching for a device, select Yes at the following prompt to allow
that device to connect to your CN3.
2 Enter the passcode that is provided with your Bluetooth audio device,
such as "0000," then tap Next to finish pairing with your audio device.
The passcode is provided by the manufacturer of your Bluetooth audio
device. You can usually find your passcode in the user manual that is
provided with your audio device.
CN3 Mobile Computer User's Manual