Intermec CN3 User Manual page 185

CN3 Mobile Computer User's Manual
4 Tap ok to return to the Security page.
TTLS (EAP-Tunneled TLS)
This protocol provides authentication like EAP-TLS (see
does not require user certificates. User authentication is done using a
password or other credentials that are transported in a securely encrypted
"tunnel" established using server certificates.
EAP-TTLS works by creating a secure, encrypted tunnel through which
you present your credentials to the authentication server. Thus, inside EAP-
TTLS there is another inner authentication protocol that you must
configure via Additional TTLS Settings.
Use "TTLS" to configure EAP-TTLS as an authentication protocol, select
"Open," "WPA," "WPA2," or "Network EAP" as an association mode.
To configure TTLS settings
1 Set 8021x Security as "TTLS," then choose one of the following:
• Set Association to "Open." (default configuration)
• Set Association to "WPA."
• Set Association to "WPA2" and Encryption to "TKIP" or "AES."
• Set Association to "Network EAP" and Encryption to either "WEP"
or "CKIP."
Chapter 5 — Network Support
page 170) but
171