Configuring The Phone; Turning On The Phone Using The Wireless Manager - Intermec CN3, CN3e User Manual

Chapter 2 — Connecting and Configuring the CN3

Configuring the Phone

Turning On the Phone Using the Wireless Manager

48
4 Depending on how the screen is set up, you can toggle between a
graph and a list of ping results:
• Tap Graph to toggle to the graphical view of 25 of the most
recent pings and their response results, like in the following
sample graph:
• Tap List to toggle to detailed information showing what ping
touched what host and the RTT (Round Trip Time).
The CN3 supports two types of cellular phone technology:
• CDMA EV-DO Rev 0
• GSM/EDGE
With a radio module installed in the CN3, you can send and receive
telephone calls as well as transmit data through wide-area (WAN)
cellular networks.
The CN3 provides a phone speaker, microphone, and speakerphone.
It also supports the use of a Bluetooth headset or hands-free kit. The
factory default setting for the phone is disabled.
After you have turned on the phone and activated it, you can
customize the features of the phone and network settings. For help,
refer to the online help on your CN3.
You can use the Wireless Manager application to turn on the phone if
Microsoft Zero Configuration is enabled. If you have Intermec
Security enabled, you cannot access the Wireless Manager. For
information on enabling and configuring Microsoft security, see
"Selecting Microsoft as Your Security Choice" on page
CN3 Series Mobile Computer User's Manual for Windows Mobile 5.0
63.