Configuring The Phone; Turning On The Phone Using The Wireless Manager; Activating The Gsm/Edge Phone - Intermec CN3 User Manual

Chapter 2 — Connecting and Configuring the CN3

Configuring the Phone

Turning On the Phone Using the Wireless Manager

Activating the GSM/EDGE Phone

44
The CN3 with Windows Mobile 6.1 supports GSM/EDGE cellular
phone technology.
With a WWAN radio module installed in the CN3, you can send and
receive telephone calls as well as transmit data through wide-area
(WAN) cellular networks.
The CN3 provides a phone speaker, microphone, and speakerphone.
It also supports the use of a Bluetooth headset or hands-free kit. The
factory default setting for the phone is disabled.
After you have turned on the phone and activated it, you can
customize the features of the phone and network settings. For help,
refer to the online help on your CN3.
You can use the Wireless Manager application to turn on the phone if
Microsoft Zero Configuration is enabled. If you have Intermec
Security enabled, you cannot access the Wireless Manager. For
information on enabling and configuring Microsoft security, see
"Selecting Microsoft as Your Security Choice" on page 65.
You can use the Wireless Manager to enable and disable Bluetooth,
Wi-Fi, and the phone if it is built into your CN3.
To turn on the phone using the wireless manager
1 Tap Start > Settings > the Connections tab > Wireless Manager.
2 In the Wireless Manager, tap Phone. The phone turns on.
3 Tap Menu > Phone Settings to configure the phone. For help, tap
Start > Help and choose Change Phone Settings.
4 Tap Done to close the Wireless Manager.
You use a SIM card to activate the GSM/EDGE phone on the CN3.
You can purchase the SIM card from your network provider.
CN3 Mobile Computer User's Manual for Windows Mobile 6.1