Intermec CN3 User Manual page 170

Chapter 5 — Network Support
Security and Authentication Information
Status
Service Status
Authentication State
Authentication Result
Supplicant Events
Intermec Supplicant Version
156
• SSID displays the broadcast range from the access point.
• Signal shows the RSSI seen from the access point.
• Channel lists the channel on which client radio is communicating with
access point.
• BSSID displays the MAC address for the access point radio
• When Privacy shows a "Y," WEP, TKIP, or AES encryption is used; an
"N" indicates that no encryption is used.
To use the Supplicant tab
The Supplicant tab provides you with security and authentication
information configured elsewhere in the CN3. See
on page 159 for setting up Funk and Microsoft security.
Description
ON: Intermec Funk Security is enabled
OFF: Microsoft Security is enabled
Starting Up:
Shutting Down:
Unknown/Undefined:
authenticated: Authentication Server successful
authentication failed: Previous authentication attempt failed
disconnected: No authentication used, Open or Static WEP connection used
acquired: Access point located, authentication process not initiated
authenticating: Attempting authentication with Authentication Server
logoff: Current session terminated by supplicant
unknown: Error occurred, but not defined
success: Authentication successful
time-out: Authentication Server not responding to requests, may be out of range
no credentials: Proper credentials not configured in device
client reject: Unable to validate access point certificate
server reject: Authentication Server rejects submitted credentials
unknown: No authentication used or in the process of authentication
Displays output from the supplicant detailing its status.
Version of Intermec Funk Security in the CN3
"Configuring Security"
CN3 Mobile Computer User's Manual