Intermec CN3 User Manual page 190

Chapter 5 — Network Support
176
• Set Association to "Network EAP" and Encryption to either "WEP"
or "CKIP."
2 Enter your unique Username to use this protocol.
3 Select Prompt for password to have the user enter this password each
time to access the protocol, or leave Use following password as selected
and enter your unique password to use the protocol without entering a
password each time you use your CN3.
4 Tap Additional Settings to set options for PAC management and assign
an anonymous EAP-FAST name.
To configure additional EAP-FAST settings
1 Tap PAC Manager to view the PAC files currently installed on your
CN3. Tap ok to return to the Additional Settings screen.
2 If you already have a PAC on your CN3, clear Allow Automatic PAC
provisioning to avoid receiving more PACs from the server.
3 If Allow Automatic PAC provisioning is checked, you can check:
• Prompt before acquiring a new PAC for notification of any
incoming PACs.
• Prompt before replacing a PAC for notification whether to replace a
current PAC with an incoming PAC.
4 Enter the Anonymous EAP-FAST Name as assigned for public usage.
This outer identity protects your login name or identity.
5 Click ok to return to the Security page.
CN3 Mobile Computer User's Manual