Intermec CN3 User Manual page 195

CN3 Mobile Computer User's Manual
5 Do one of the following:
To disable WEP encryption
• Set Authentication to either "Open" if WEP keys are not required; or
"Shared" when WEP keys are required for association.
• Set Data Encryption to "Disabled."
To enable WEP encryption
• Set Authentication to either "Open" if WEP keys are not required; or
"Shared" when WEP keys are required for association.
• Set Data Encryption to "WEP."
• Clear The key is automatically provided, then enter the new
Network key and select the appropriate Key index to change the
network key.
Chapter 5 — Network Support
181