LCIT PB3170
§
A stabilizer is attached to the machine when it is shipped. Do not remove it.
11. Turn the power switch ON.
12. Set the paper, and check that the paper size set in the paper feed tray is displayed on the
operation panel.
13. Adjust the registration for the paper feed unit.
SP1-002-004 (Side-to-Side Registration Paper Tray 3)
Changing the paper size
Paper size is set as shown below when the machine is shipped from the factory.
NA: LT LEF
EU.AA.CHN: A4 LEF
The paper size can be changed to A4 or LT.
1.
Pull out the left tray and right tray.
2.
Right tray side fence (front), [A], right tray side fence (rear) [B] and right tray end fence [C]
( ×3)
D146/D147/D148/D149/D150
2-36
SM