Tray Heater for Main Machine
⇒
2.40 TRAY HEATER FOR MAIN MACHINE
Unplug the machine power cord before starting the following procedure.
Be careful not to damage any of the harnesses.
After doing this procedure, make sure that harnesses are not damaged or pinched.
2.40.1 ACCESSORY CHECK
No.
1
Tray Heater
2
Tapping Screw: M3 X 8
3
PCB: DHB
4
Harness for tray
5
Harness for DC
6
Harness for AC
7
Tapping Screw: M3 X 6
2.40.2 INSTALLATION PROCEDURE
Attaching the Heater
1.
Remove trays 1 and 2 from the machine.
2.
Connect the connector of the heater to the connector of the main machine.
3.
Attach the heater ( x 1).
D146/D147/D148/D149/D150
Description
2-198
Rev. 04/07/2014
Q'ty
1
1
1
1
1
1
3
SM