Scanner Wire Assembly (Front Side) - Ricoh D146 Service Manual

§
Do not touch the mirror and the lamp.
§
When you move the carriage, hold the central part and move it gently.

Scanner wire assembly (front side)

1. Pull the scanner wire ball end [B] to the pulley [A] from the left side of the pulley as shown in
the diagram.
2. Set the ball [C] in the center part of the wire on the pulley.
3. Turn the ball end [D] 5 times counterclockwise along the edge on the rear side of the pulley.
4. Turn the ring end [E] 3.5times clockwise along the edge at the front side of pulley.
5. Check that the blue marks [F] of the wire overlap, and secure it temporarily with Teflon tape,
etc.
SM 4-39 D146/D147/D148/D149/D150
Scanner Unit