Ricoh D146 Service Manual page 93

Main Machine Installation
4. Press [Exit] again.
5. Press the [User Tools/Counter] key.
§
After step 10, the initial operation display appears as below. However, HDD data
encryption has not been completed at this moment. Step 11 and step 12 should be
performed in order to encrypt the HDD data.
6. Turn the main power switch off and on.
7. "Memory Conversion complete. Turn the main power switch off" is displayed as below. Then
turn the main power switch off and on.
8. Then initial operation display appears again. After this step, HDD data encryption has already
been completed.
D146/D147/D148/D149/D150 2-22 SM