Installation Procedure; Removal Of Packing Materials And Shipping Retainers / Removal Of Pcdu Seal - Ricoh D146 Service Manual

2.2.3 INSTALLATION PROCEDURE

§
Remove the tape from the development units before you turn the main switch on. The
development units can be severely damaged if you do not remove the tape.
Put the machine on the paper tray unit or the LCT first if you install an optional paper tray unit or
the optional LCT at the same time. Then install the machine and other options.
§
Keep the shipping retainers after you install the machine. You may need them in the
future if you transport the machine to another location.
Removal of packing materials and shipping retainers / Removal of PCDU
seal
1. Remove the machine from the box, and check the items in the package.
§
Before lifting up the machine, as there are hidden handles, remove the retainers [A]
at the lower front right.
§
When you lift the machine, hold the correct parts, as shown in the diagram below.
§
Do not lift by holding the scanner unit, etc., because this might deform the machine
or break the exterior covers
SM 2-7 D146/D147/D148/D149/D150
Main Machine Installation