Changing The Paper Size; Precautions For Changing The Paper Size; Changing The Paper Size In Tray 2 - Ricoh Pro C7100s Operating Instructions Manual

4. Paper Specifications and Adding Paper

Changing the Paper Size

Precautions for Changing the Paper Size

• When loading paper, take care not to trap or injure your fingers.
• Do not stack paper over the limit mark.
• Do not change the size of the paper for the specified printing tray while documents are being
scanned or printed.
• (mainly Europe and Asia)
Tray 1 can hold A4 paper only. If you want to print on other paper sizes from Tray 1, contact
your service representative.
• (mainly North America)
Tray 1 can hold 8
contact your service representative.
• (mainly Europe and Asia)
A3/11 × 17 tray unit can hold A3
A3/11 × 17 tray unit, contact your service representative.
• (mainly North America)
A3/11 × 17 tray unit can hold 11 × 17
from A3/11 × 17 tray unit, contact your service representative.
• After loading paper whose sizes are not detected automatically, be sure to specify the appropriate
paper size in [Tray Paper Settings]. If you do not, misfeeds might occur. For details, see page 152
"Changing to a Size That Is Not Automatically Detected".
• To prevent multiple sheets from being fed at once, fan the paper before loading.
• Straighten curled or warped paper before loading.
• For details about the paper sizes and types that can be used, see page 154 "Recommended
Paper Sizes and Types".

Changing the Paper Size in Tray 2

• Check the paper edges are aligned at the right side.
138
1
/ × 11 paper only. If you want to print on other paper sizes from Tray 1,
2
paper only. If you want to print on other paper sizes from
paper only. If you want to print on other paper sizes