Remove the rear brake pump and related protection as
described in chapter H "Brakes".
Disconnect the connector of the rear brake stop light
from the main wiring.
EXHAUST SILENCERS REMOVAL
Remove the rider footrests by unscrewing the two fix-
ing (1) screws.
NOTE
When reassembling tighten the footrest
fixing screws to the prescribed torque
pressure.
Torque pressure of the screws fixing the
footrests to the plate: 24 ÷ 28 N•m.
Frame
24÷28 N•m
- 25 -
G
1