MV Agusta Brutale 990 R Workshop Manual page 25

To accede to the oil filter and the discharge and filling
holes of the engine oil, it is necessary to carry out cer-
tain operations beforehand:
•
Place the motorcycle on the rear stand.
The substitution of the engine oil must
N.B.
be done with a hot engine as opposed to
the oil-check that is done with a cold
engine.
Remove the oil filler plug on the right side of the motor-
cycle so that it facilitates the discharge of the used oil.
Remove the filler cap using the 10 mm hexagonal bar
attached to a wrench.
Place a container underneath the engine to collect the
used oil.
Remove the oil discharge plug (1).
Recover the oil in an appropriate container.
Do not scatter exhausted oil into the envi-
ronment.
Wait until the lubrication system is completely empty of
used engine oil.
Substitution of the oil filter
Remove the 4 fixing screws (2) of the oil filter cover.
Maintenance
- 9 -
1
B
2