MV Agusta Brutale 990 R Workshop Manual page 88

- Now, press "OK" for less than four seconds, it will
clear the display. Otherwise, press "SET" for more
than four seconds to stop the reset procedure.
B
- Press "OK" again to quit "TRIP 2 RESET" and move
on to the next mode.
How to set the measurement units
The following measurement units may be changed at
the same time:
- Speed
- Distance covered
The display modes may be changed or set
when the engine is off, the gears are in neu-
tral, the motorbike is stationary, and with
your feet on the ground. Do not change the
display while driving.
- Access "RUN" and press "SET" repeatedly until
"UNIT CHANGE" appears.
Maintenance
- 72 -