FUEL UNION TUBE
Check for leaks ¨
B
Carry out a visual check for eventual leakages from the
fuel feed tubing and the unions (see figure).
Substitute damaged parts if leaks or evaporation are
found.
ASSEMBLY OF FUEL TUBE
Substitute ¨
The procedure to follow in the case of substitution of
the feed tubing is as follows:
Remove in this order:
• Rider seat
• Tank side panel
• Ignition switch cover
• Fuel tank
Press the two stop tabs simultaneously and take out
the tube.
Maintenance
First 1000 kilometers and then
every 6000 kilometers
At least every three years
- 36 -