MV Agusta Brutale 990 R Workshop Manual page 257

Check that the coupling bushes of the gear flange sup-
port (1) and the driving flange (2) do not show any signs
of excessive or uneven wear.
Bushes coupling area (1):
Grease AGIP GR SM
Bushes coupling area (2):
Grease AGIP GREASE 30
Do not apply grease to the threads of the pins.
Wheel hub reassembly
Lightly grease the wheel hub.
Introduce the hub to the swingarm from the left side of
the motorcycle and push it in.
Screw in the two screws on the swingarm without tigh-
tening.
Recommended grease: Agip Grease 30
To assemble the brake caliper-carrying flange, carry
out the following operations:
Grease the O-rings and insert them into their respecti-
ve seats on the flange.
Assemble the rear spacer ring in contact with the hub,
then the brake caliper-carrying flange (1), the second
spacer ring and the Seeger retaining ring (1).
It is important to ensure that the Seeger retaining ring
is inserted around the whole circumference of the seat.
Suspension and wheels
- 63 -
1
2
1
F