After the assembly operation, make sure
that the positive terminal cable is positio-
ned correctly inside the rear frame unit
(see figure).
E
PROTECTION COVER
CHARGING SYSTEM
Warning function
• Disconnection of the coil
• Disconnection of the regulator
• Disconnection of terminal B (voltage at terminal S is
less than 13 volts)
Any one of these abnormalities switches on the warning
light on the instrument panel.
As shown in the figure, the temperature influences the
characteristics of the regulator with steps of variation of
the regulated voltage.
Electrical system
PLACEMENT AND ASSEMBLY OF TERMINALS (WIRE TERMINALS) ON THE BATTERY
POSITIVE WIRE (+)
POSITIVE POLE (+)
NEGATIVE POLE (-)
- 10 -
NEGATIVE WIRE (-)
NEGATIVE WIRE (-)