MV Agusta Brutale 990 R Workshop Manual page 289

With regards to the positioning of the cables, fasteners
and various wiring consult the various tables shown in
the Spare Parts Catalogue Brutale 990 R - 1090 RR
(Code No. 8000B3254).
Carry out the sequence of operations of assembly in
reverse order to removal for the correct assembly of
the frame to the motorcycle.
Tighten the various fixings to the torque pressure
shown in the following diagram.
PART No. DRAWING No. DESCRIPTION
1 8000B3004
2 8000B2757
3 8000B2756
4 8000B2750
5 8000B2983
6 8000B2755
7 8D00B2690
8 8C00B2690
The tightening of the engine mounting screws and the
plates 1 2 3 4 5 6 is carried out with the motor-
cycle resting on its wheels and the engine hanging
from the frame.
The tightening of the rear sub-frame screws 7 8 is
carried out by letting the sub-frame drop into position
by its own weight.
Utilise "AGIP GREASE 30" for the screws.
Frame
Front engine mounting screw
Upper engine mounting screw
Lower engine mounting screw
Plate – frame screw
Swingarm pin screw
Rear suspension rocker arm screw
Upper plate-sub-frame fixing screw
Lower plate-sub-frame fixing screw
DIMENSIONS TORQUE PRESSURE
M12x1.25
M12x1.25
M12x1.25
M12x1.25
M15x1.25
M10x1.25
M8x1.25
M8x1.25
- 19 -
N·m Kgm
55/60 5.5/6.0
55/60 5.5/6.0
55/60 5.5/6.0
55/60 5.5/6.0
70/75 7.0/7.5
45/50 4.5/5.0
24/28 2.4/2.8
24/28 2.4/2.8
G