Remove the screw (2) connecting the oil radiator and
the water radiator.
Move the radiators slightly towards the front of the
motorcycle, then remove the flange fixing the exhaust
manifolds to the cylinder unit by unscrewing the nut (1).
During this operation, take care not to touch
the exhaust pipes in order to avoid burns.
Unscrew the compensatory housing fixing screws.
Special tool N. 8000B2051
When reassembling, it is necessary to apply a special
product to the three screws. Lightly screw them in.
Tighten the central screw first and then the other two to
the prescribed torque pressure.
Recommended thread-locking fluid:
Loctite 243
Torque pressure: 20 ÷ 22 N•m
Suspension and wheels
- 51 -
2
1
F